All about royal purple oil filters

The film strength of a lubricant is its inherent ability to withstand the effects of load, speed and temperature without breaking down or rupturing, thus enabling the lubricant to maintain an unbroken film between lubricated surfaces under operating conditions. Royal Purple oil filters have high film strength that improves combustion to free up more power, optimize fuel economy and reduce emissions. High film strength also dramatically reduces wear.

Royal Purple manufactures only one type of oil filter – the super-premium Extended Life Oil Filter, designed to perform as the best oil filter available. This filter is engineered to match superior particle removal with optimized flow thus maximum engine protection and filter life. The Royal Purple Filter 10-48 is built smarter and stronger therefore causes it to outperform in the toughest conditions.

Royal Purple Filter – Design and Construction Advamtages

1. Shell: Each Royal Purple 10-48 oil filter features thicker shell material, thus extra strength and extra security against puncture from road debris.
2. Metal end-caps: Provide each oil filter with a positive seal for filter element assembly.
3. Center Tube: Designed to prevent filter element collapse.
4. Filter Element: 100% screen-backed synthetic media provides superior filtration while keeping flow restriction low.
5. By-pass Valve: The Royal Purple Filter 10-48 is engineered to ensure oil flow in situations of excessive filter element flow restriction.
6. Steel Backplate: Due to the heavy-gauge steel backplate through each filter, our filter has higher burst strength.
7. Gasket: Premium nitrile rubber with special lubricity compound reduces torque during installation and removal.
8. Silicon Anti-Drain Back Valve: The Royal Purple Filter 10-48 prevents dry starts by eliminating oil drain-back during shutdown. The anti-drain back valve is made of silicone, which outperforms and outlasts standard nitrile rubber in both extreme cold and hot oil temperatures.

The 100% synthetic micro-glass media used to make extended life filters provides superior particle removal. Lucky 7 Trucks has the best quality Royal purple oil filters. Order your product on http://lucky7trucks.com or call at (480) 460-8228.

Read More

Why do we need engine break-in oil?

Engine building is a process that needs everything on place to run smoothly. Everything must be done correctly including all the parts machined to the correct tolerances, assembled with the correct clearances and of course, lubricated with the right lubricants of all kinds. If the parts don’t fit-in right, or if they are not lubricated with the high performance engine break-in oil, your engine can end abruptly.

Why the perfect break-in oil is a must?

An engine can’t run without the right fluid. And what does the right oil means? The one that would lubricate, cool, clean, and prevent corrosion. If not changed on a regular basis, you might expect metal, dirt, soot, and other particles building up in the oil causing abrasion and thereby accelerating the wear of engine in the long run. Ironically, the abrasions initially are too minute to get caught by the filter.

The only solution is to keep changing the oil often and at the same time to use the best quality break-in oil when buying or building a new engine. The right oil would not only help your engine during the “break-in” period, it would also help it run smoothly in the long run.

Benefits of using the best engine break-in oil:

While using the high performance engine break-in oil like the variant of Royal Purple, you may expect benefits including:

1. It is formulated to allow optimal ring seal and protect rotating assembly components such as the camshaft and valve train from initial start up wear.
2. It contains high level of zinc and phosphorus to optimize protection in flat-tappet and roller engines.
3. It combines highly refined mineral oil with advanced additives that are preferred for engine break-in oils.

Royal Purple engine break-in oil is fully formulated and doesn’t require the use of any extra chemical additives. Check out the collection on http://lucky7trucks.com/, the official website of Lucky 7 Trucks, or call up at 602-999-2007 to know more.

Read More

Why use Royal Purple?

 

If you are looking for a premium synthetic base oil, make sure to use Royal Purple synthetic oils for better lubricity and consistent viscosity. Better resistance to oxidation is also ensured by the brand’s products, thanks to its consistent molecular structure. Visit their official site www.lucky7trucks.com to check the entire range of synthetic base oils.

Read More

Transmission Fluid Change or Flush?

Every automobile – be it manual or automatic – requires a transmission fluid to lubricate the transmission, keep it cool and allow the gear to shift smoothly. A good quality tranny fluid will prevent overheating, oxidation, wear and tear and the like. On the whole, it is noted that a synthetic transmission fluid will outperform conventional ones on all counts.

While some of the synthetics do deliver exceptional performance, it is a fact that every transmission fluid will need to be changed sooner or later. The interval can vary greatly depending on the quality of the fluid. However, avoiding this service completely will ultimately lead to transmission failure!

Now, at times, service centers recommend a transmission flush rather than just fluid change. The former is an elaborate process and costs much more than the change service.

Let’s take a look at what these services entail and when they are needed:

Fluid change – This involves draining the transmission fluid from the pan and replacing the filter before a fresh refilling. As a large part of the contaminated fluid is replaced, it will remove a lot of the buildup and improve the performance of the vehicle.

Transmission flush – This is an elaborate process in which the entire old fluid is pumped out. Along with this, all the accumulated sludge and other debris are eliminated and the system contains only brand new tranny fluid. The transmission is bound to run much more smoothly and efficiently.

It is clear that a complete flush is definitely more effective as all the contaminated fluid gets removed. However, the choice of service will depend on various factors, like the existing condition of the tranny fluid in the vehicle, the last fluid change (if any), manufacturer recommendations and so on.

On the whole, it is advisable to opt for a top quality synthetic transmission fluid, like Royal Purple (www.lucky7trucks.com) as it maintains optimum efficiency of the transmission and comes with an extended change interval too!

Read More

5 Reasons how Oil Change Save Vehicles

Deposition of dirt causes erosion and eventually reduces the life span of an engine. Change the car oil regularly for a longer run of your car.

Read More

Importance of the Right Lubricant For Your Car

The hunt for the right lubricants for your car engine ends when you find one that can do justice to every sense of the word. Check for the vital points if the lube can cool engine component, or does remove impurities. The other elements include engine maintenance and protection from dirt and dust. Visit their website and check for the different lubes that are best for your car engine.

Read More

Things to note while selecting Gear Oils

Looking for the best gear oil? We might suggest to go for Royal Purple gear oil that is ascertained to provide optimum lubrication to your car engine. But then, how would you know whether a particular gear oil is actually good for your vehicle? You need to tick off certain criteria to choose the right one.

While selecting lubricants for industrial gearing, there could be numerous factors that can be considered. And the same can’t be selected just on the basis of maintenance manual’s QPL. Below are some of the criteria that must be addressed while choosing the best lubricant for a gear set.

1. Viscosity

How to find the appropriate viscosity grade? The viscosity for a gear lubricant is majorly chosen to provide a desired film thickness between interacting surfaces at a given speed and load. One of the most common way to determine viscosity is the ANSI (American National Standards Institute) and AGMA (American Gear Manufacturers Association) standard ANSI/AGMA 9005-E02. These determine the viscosity index and the pressure-viscosity coefficient of the lubricant.

2. Type of Gear Lubricant and Additive

Once the viscosity is figured out, the basic type of lubricant must be chosen. The common categories of gear lubricant are: R&O, antiscuff, and compounded. The gear lubricant type that best fits a given application will be determined by the operating conditions. This selection is somewhat subjective keeping in mind that there are no standard guidelines for the same.

3. Base Oil Type

Mineral base oils typically have higher pressure-viscosity coefficients than common synthetics which eventually allows for greater film thickness at given operating viscosities. Many synthetic base stocks have greater inherent resistance to oxidation and thermal degradation. These qualities make the gear oils preferable for applications with high operating temperatures allowing them for extended service intervals. Thanks to the high viscosity index, it also makes synthetic products suitable for a wider range of ambient temperatures, thereby eliminating the need for seasonal oil changes.

Benefits of using Royal Purple gear oils:

• Extends gear and bearing life
• Brings down operating temperature
• Maximizes horsepower
• Contains limited-slip friction modifier
• Lowers coefficient of friction
• Provides excellent corrosion protection
• Separates water from the mix rapidly
• Engineered for using in open, limited-slip and locking differential

Royal Purple gear oil is the best suggested for your vehicle for the long run desired. If you are wondering where to order the product from, visit Lucky 7 Trucks on https://lucky7trucks.com/ or call at 602-999-2007 for details.

Read More