Things to note while selecting Gear Oils

Looking for the best gear oil? We might suggest to go for Royal Purple gear oil that is ascertained to provide optimum lubrication to your car engine. But then, how would you know whether a particular gear oil is actually good for your vehicle? You need to tick off certain criteria to choose the right one.

While selecting lubricants for industrial gearing, there could be numerous factors that can be considered. And the same can’t be selected just on the basis of maintenance manual’s QPL. Below are some of the criteria that must be addressed while choosing the best lubricant for a gear set.

1. Viscosity

How to find the appropriate viscosity grade? The viscosity for a gear lubricant is majorly chosen to provide a desired film thickness between interacting surfaces at a given speed and load. One of the most common way to determine viscosity is the ANSI (American National Standards Institute) and AGMA (American Gear Manufacturers Association) standard ANSI/AGMA 9005-E02. These determine the viscosity index and the pressure-viscosity coefficient of the lubricant.

2. Type of Gear Lubricant and Additive

Once the viscosity is figured out, the basic type of lubricant must be chosen. The common categories of gear lubricant are: R&O, antiscuff, and compounded. The gear lubricant type that best fits a given application will be determined by the operating conditions. This selection is somewhat subjective keeping in mind that there are no standard guidelines for the same.

3. Base Oil Type

Mineral base oils typically have higher pressure-viscosity coefficients than common synthetics which eventually allows for greater film thickness at given operating viscosities. Many synthetic base stocks have greater inherent resistance to oxidation and thermal degradation. These qualities make the gear oils preferable for applications with high operating temperatures allowing them for extended service intervals. Thanks to the high viscosity index, it also makes synthetic products suitable for a wider range of ambient temperatures, thereby eliminating the need for seasonal oil changes.

Benefits of using Royal Purple gear oils:

• Extends gear and bearing life
• Brings down operating temperature
• Maximizes horsepower
• Contains limited-slip friction modifier
• Lowers coefficient of friction
• Provides excellent corrosion protection
• Separates water from the mix rapidly
• Engineered for using in open, limited-slip and locking differential

Royal Purple gear oil is the best suggested for your vehicle for the long run desired. If you are wondering where to order the product from, visit Lucky 7 Trucks on https://lucky7trucks.com/ or call at 602-999-2007 for details.